Effect of light supply on CO2 capture from atmosphere by Chlorella vulgaris and Pseudokirchneriella subcapitata

Carbon dioxide (CO₂) is one of the primary greenhouse gases that contribute to climate change. Consequently, emission reduction technologies will be needed to reduce CO₂ atmospheric concentration. Microalgae may have an important role in this context. They are photosynthetic microorganisms that are able to fix atmospheric CO₂ using solar energy with efficiency ten times higher than terrestrial plants. The objectives of this study were: (i) to analyse the effect of light supply on the growth of Chlorella vulgaris and Pseudokirchneriella subcapitata; (ii) to assess the atmospheric CO₂ capture by these microalgae; and (iii) to determine the parameters of the Monod model that describe the influence of irradiance on the growth of the selected microalgae. Both microalgae presented higher growth rates with high irradiance values and discontinuous light supply. The continuous supply of light at the highest irradiance value was not beneficial for C. vulgaris due to photooxidation. Additionally, C. vulgaris achieved the highest CO₂ fixation rate with the value of 0.305 g-CO₂ L^?1 d^?1. The parameters of the Monod model demonstrated that C. vulgaris can achieve higher specific growth rates (and higher CO₂ fixation rates) if cultivated under higher irradiances than the studied values. The presented results showed that microalgal culture is a promising strategy for CO₂ capture from atmosphere.     

PAH removal from spiked municipal wastewater sewage sludge using biological, chemical and electrochemical treatments

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied due to their presence in all the environmental media and toxicity to life. These molecules are strongly adsorbed on the particulate matters of soils, sludges or sediments because of their strong hydrophobicity which makes them less bioavailability, thus limiting their bioremediation. Different sludge treatment processes were tested to evaluate their performances for PAH removal from sludge prealably doped with 11 PAHs (5.5mg each PAH kg(-1) of dry matter (DM)): two biological processes (mesophilic aerobic digestion (MAD) and simultaneous sewage sludge digestion and metal leaching (METIX-BS)) were tested to evaluate PAH biodegradation in sewage sludge. In parallel, two chemical processes (quite similar Fenton processes: chemical metal leaching (METIX-AC) and chemical stabilization (STABIOX)) and one electrochemical process (electrochemical stabilization (ELECSTAB)) were tested to measure PAH removal by these oxidative processes. Moreover, PAH solubilisation from sludge by addition of a nonionic surfactant Tween 80 (Tw80) was also tested. The best yields of PAH removal were obtained by MAD and METIX-BS with more than 95% 3-ring PAH removal after a 21-day treatment period. Tw80 addition during MAD treatment increased 4-ring PAHs removal rate. In addition, more than 45% of 3-ring PAHs were removed from sludge by METIX-AC and during ELECSTAB process were quiet good with approximately 62% of 3-ring PAHs removal. However, little weaker removal of 3-ring PAHs (<35%) by STABIOX. None of the tested processes were efficient for the elimination of high molecular weight (> or = 5-ring) PAHs from sludge.     

Electrochemical degradation applied to the metabolites of Acid Orange 7 anaerobic biotreatment

The electrochemical oxidation of the biotic degradation products of the textile dye C.I. Acid Orange 7 (AO7) was achieved using a boron doped diamond electrode (BDD). Tests were performed with model solutions of the biotic degradation products, sulphanilic acid (SA) and 1-amino-2-naphthol (AN), and also with real effluents obtained in experiments carried out in an up-flow anaerobic sludge blanket (UASB) reactor, fed with a simulated textile effluent containing AO7, working in mesophilic or thermophilic conditions. Bulk electrolysis was studied using two different supporting electrolytes - NaCl and Na(2)SO(4). The influence of initial metabolite concentration and current density on the electrodegradation rates of the biotic products was investigated. For the UASB effluents, oxidation tests were carried out for different electrolytes and at different current densities. Samples were collected at pre-selected intervals and absorbance measurements, chemical oxygen demand (COD) and total organic carbon (TOC) tests and high performance liquid chromatography (HPLC) analysis were performed. Results have shown an almost complete elimination of the persistent pollutants and a COD removal higher than 70% for both AN and SA. For the UASB effluents, COD removals between 45% and 90% and TOC removals varying from 19% to 41% were obtained.     

Is there a role for fetal interventions in gastroschisis management? – An updated comprehensive review

We conducted a comprehensive evidence-based review on the epidemiology and current standard of care of gastroschisis management as well as the pathophysiology, rationale and feasibility of fetal therapy as a viable alternative. Gastroschisis is a periumbilical abdominal wall defect characterized by abdominal viscera herniation in utero. It affects 4 in 10 000 live births, but the prevalence has steadily increased in recent years. Gastroschisis is typically diagnosed on routine second-trimester ultrasound. The overall prognosis is favorable, but complex gastroschisis, which accounts for about 10% to 15% of cases, is associated with a higher mortality, significant disease burden and higher healthcare costs due to long- and short-term complications. The current standard of care has yet to be established but generally involves continued fetal surveillance and multidisciplinary perinatal care. Postnatal surgical repair is achieved with primary closure, staged silo closure or sutureless repair. Experimental animal studies have demonstrated the feasibility of in utero closure, antiinflammatory therapy and prenatal regenerative therapy. However, reports of early preterm delivery and amnioinfusion trials have failed to show any benefit in humans. Further experimental studies and human trials are necessary to demonstrate the potential benefit of fetal therapy in gastroschisis.     

Megaprojects and social and environmental changes: The case of the Thai "water grid"

Large-scale development of irrigation has long been an attractive option of postwar development, and the Mekong region has been no exception. Thailand has developed approximately four million hectares of irrigated land, and its northeastern region (Isaan)--both the driest and poorest part of the country--has been the target of many water projects. However, "full development" of its potential has been constrained by the lack of storage sites and the difficulty of diverting water from the Mekong River. Several ambitious projects have been discussed during the last 50 y, all of which have been aimed at "greening Isaan." In 2003, the Thai administration launched the idea of a national "water grid" that would triple the area of irrigated land in the country. This paper analyzes the emergence of this megaproject, its governance, and its economic and environmental soundness.     

Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites

This study investigated some of the important physical (thickness swelling) and mechanical (modulus of rupture, modulus of elasticity and internal bond) properties of single-layer particleboard panels made from eucalyptus (Eucalyptus camaldulensis Dehn.), waste of grass clippings (Lolium perenne L.) and combinations of the two. The chemical properties (pH, holocelluse and alpha cellulose contents, and water, alcohol-benzene and 1% sodium hydroxide solubilities) of the raw materials were also determined. Panels with a 6:94 ratio of grass-to-eucalyptus particles had the required mechanical properties for interior fitments including furniture and general uses. Boards manufactured with 100% grass clippings exhibited the lowest quality. The overall panel properties improved with a lower percentage of grass clippings added. Based on initial results, it also appears that grass should compose no more than 13% to achieve acceptable panel properties for interior fitments and general uses.